Lorry/Crane Attachments

New Brick Stack Grapple

Brick stack grapples with parallel squeeze KM 332 and KM 333:
The technically unique KM 332 brick stack grapple with hydraulic parallel squeeze is a versatile tool for palletized and non-palletized materials – available with rigid or adjustable (V) plunge depth.
The KM 333 is the reinforced type, also as rigid or adjustable (V) version.
Both versions are versatile tools with synchronized arms that feature safety of work, an easy use and a long service life. The compression rails are equipped with durable and replaceable rubber inserts.

Brick stack grapples with scissor grab KM 331:
The robust brick stack grapple KM 331 handles palletized and non-palletized materials up to 2000 kg / 4400 lbs. It features a fixed plunge depth with pivot, synchronized clamping arms - hydraulically operated. The overall height is reduced due to lower rotator position. The compression rails are equipped with durable and replaceable rubber inserts.

A wide range of accessories is available for all brick stack grapples.

Pallet Forks

With hydraulic/mechanical center of gravity adjustment & adjustable tines with spindle KM 401H and KM 401:
The efficient KINSHOFER pallet fork with a spring loaded or hydraulically compensating center of gravity can easily be adapted to different loads with adjustable plunge depth and adjustable tine spread. An efficient handling of many different kinds of loads like stone or brickstack, protection trellis or other general cargo is possible due to the hydraulic shifting or the easy adjustment with a stainless steel-plastic-sliding guide in the upper component respectively.
The tool is easy to use due to its dimensions since no part of the pallet fork is wider than a standard pallet, so loads close to walls can be handled without any problems.

The telescopic version of the above pallet forks has been developed especially for overheight loads such as insulating material – adjustable in steps with a lock pin up to a height of 2500 mm / 98.43 in.

With self/manual shifting & tines with lock pin adjustment KM 414 and KM 415:
The robust KINSHOFER pallet forks with spring loaded or manual center of gravity compensation
can easily be adapted to different loads with adjustable plunge depth and tine spread.
An efficient handling of many different kinds of loads in an economic, one-man operation is possible due to the automatic shifting of the spring loaded version to a preset position or a manual change of position of shifting the collar by the operator. Throat height and tine spread are adjustable in steps with a lock pin.

Universal extensions for pallet forks:
Thanks to KM 460 universal extension you can extend the throat height of your pallet fork by 750 mm or 1200 mm / 29.53 in or 47.24 in.

Universal Fork

The efficient KM 461 KINSHOFER universal forks for loader cranes handle wallboards and other lying building materials up to a size of 1250 mm / 49 in height and 460 mm / 18 in depth. The tine spread can be adjusted to the sheets that have to be handled. The boards can be lifted and folded into a vertical position and are clamped between tines and frame, preventing them from sliding during handling. The load itself is protected from damage by semi-tapered forged tines with rollers and pads.

A special version with second suspension point on the main beam enables the unloading of lying boards through narrow openings in the wall.

Clamshell Buckets

The reliability of the revolutionary HPXdrive in combination with robust, versatile shells. Thanks to the drive system, the movement and closing force of the shells is constant and synchronized, generated by two hollow shafts, which run opposed and have a helix thread, hydraulically driven by a single piston.
The HPXdrive is available as standard or heavy duty version.

But no matter the size: There a no hydraulic cylinders required anymore!

A longer life cycle of up to 50% and the integrated self-lubrication as the drive unit runs in a permanent oil bath are also featured by the drive, as well as the compact design, making the HPXdrive resistant to dirt and debris.

Versatility is granted by different types of available shells that can easily be refitted onto the unit.
The perfect alternative to cylinder-operated grapples that do not only save time and cost, but also facilitate every task.

The clamshell buckets with HPXdrive are available as Standard version for daily routine jobs or as Heavy Duty version, both with shell exchange system.

KM 605HPX-Z is a version especially designed for Z-cranes. During transport or when not needed, the grapple rests against the crane arm without protruding the truck's width. 

A wide range of accessories, including scrapers, different mounting options and load hooks are available for all clamshell buckets.

Barrier Lifters

The KM 932MB barrier lifter is a mechanical grapple for the fast and convenient handling of concrete barriers and blocks.

The carbide gripping pads ensure a safe operation, even on wet or coated surfaces. The fully integrated, mechanically operated “latch & release” system (functions automatically each time the load line is slackened ) allows the unit to function independently, without assistance from a ground man.

Multi-position arms are a standard feature, meaning that one unit can achieve different gripping ranges by simply changing a pin position. The elimination of slings and chains means that more cycles can be achieved per hour.

Orange Peel Grapples

The KINSHOFER orange peel grapples are the ideal tools for handling car bodies, loose waste, rubbish, gravel or sand, depending on the style of tines: fully or half closing for loose material, pointed tines for bulky scrap.

A long service life is guaranteed due to the solid design: the hydraulic cylinder pistons are protected by the gripping arms. Hydraulic hoses, connections and oil distributor are positioned in the robust centre section.

Special wear resistant materials used in the production of gripping arms and oversized bearings ensure a long life for these sturdy grapples.

The grapples are available as a smaller version with five arms (KM 652-5V) and half closing tines or a larger version, with different tine shapes and four or five gripping arms, depending on your requirements.

KM 652-5V, being a new version, also features a long service life, a high closing force and a replaceable, bolt-on oil distributor with hoseless, direct rotator connection. The grapple is also available without rotator but with load eye for hook connection, optionally also with non-return valve plate.

The special version KM 652/2 of the reliable orange peel grapples is asymmetric with half closing tines for an easy transport on Z-cranes, resting flat against the crane arm and not protruding the width of the carrier machine. It is mainly used for handling scrap, waste and construction materials, and is available with five or six arms – depending on the tasks.

Rock & Timber Grapples

The reliability of the revolutionary HPXdrive in combination with robust, versatile tines – ideal for handling all kinds of natural rocks, curbstones etc in landscaping architecture. Thanks to the drive system, the movement and closing force of the shells is constant and synchronized, generated by two hollow shafts, which run opposed and have a helix thread, hydraulically driven by a single piston.
The HPXdrive is available as standard or heavy duty version.

But no matter the size: There a no hydraulic cylinders required anymore!

A longer life cycle of up to 50% and the integrated self-lubrication as the drive unit runs in a permanent oil bath are also featured by the drive, as well as the compact design, making the HPXdrive resistant to dirt and debris. 

Versatility is granted by different types of available shells that can easily be refitted onto the unit.
The perfect alternative to cylinder-operated grapples that do not only save time and cost, but also facilitate every task.

The rock grapples with HPXdrive are available as standard daily routine or heavy duty version, each featuring the respective HPXdrive.

A wide range of accessories, including different mounting options or load hooks are available for all rock grapples with HPXdrive.

Logging Grapples

KINSHOFER logging grapples are robust and powerful tools for logs – especially for heavy duty operations. Due to their ability to securely clamp even thin timber with only 90 mm / 3.5 in and more, they are perfectly suited to handle single trunks.

A sturdy construction, high quality components and a generously dimensioned bearing system contribute to the grapple’s long service life.

Depending on the size of the logging grapple, it will be equipped with a suitable rotator.

A reinforced version (S-version) of the grapple is also available.

Especially for telehandlers: KM 634-3Z Harvester

KM 634-3Z has been developed especially for telehandlers. During the sawing process, the three robust tines (Hardox 400 steel) of the integrated gripper hold the log firmely and securely. 
The attachment is available in two sizes. 

Features: 

Automatic re-stress of the grab during the sawing process. The re-stress can be stopped by a lever to cut e.g. single branches separately.
Optimum grab design allows to clamp even very thin logs.
Saw equipped with automatic chain pretension and greasing.
Precise positioning thanks to the KINSHOFER-rotation with 4 motors and 2 holding breaks (KM 634-0.35-3Z) or the worm drive (KM 634-0.25-3Z).
High torque.
Highly safe hydraulics due to an integrated non-return valve, so the load is held safely even in the case of pressure drops.
8/3 solenoid valve included to operate the grab with only one control circuit.

Hay & Forestry Grapples

The reliability of the revolutionary HPXdrive in combination with robust, versatile tines – ideal for handling hay, brushwood, compost or manure. Thanks to the drive system, the movement and closing force of the shells is constant and synchronized, generated by two hollow shafts, which run opposed and have a helix thread, hydraulically driven by a single piston.
The HPXdrive is available as standard or heavy duty version.

But no matter the size: There a no hydraulic cylinders required anymore!

A longer life cycle of up to 50% and the integrated self-lubrication as the drive unit runs in a permanent oil bath are also featured by the drive, as well as the compact design, making the HPXdrive resistant to dirt and debris.
Versatility is granted by different types of available shells that can easily be refitted onto the unit.
The perfect alternative to cylinder-operated grapples that do not only save time and cost, but also facilitate every task.

The hay and forestry grapples with HPXdrive are available as daily routine or heavy duty version, each featuring the respective HPXdrive.

A wide range of accessories, including different mounting options or load hooks are available for all hay and forestry grapples with HPXdrive.

Manipulators

Pole Grapples:
The KINSHOFER manipulators are hydraulically operated attachments that are used for the positioning of tubes or poles, suitable for the use on loader cranes with three functions (flange mounting on the mechanical extension of the crane).
The manoeuvrability is guaranteed by three hydraulic functions: gripping, lifting and turning of straight round poles. The precise operation is assured by continuous rotation, equipped with mechanically operating, hydraulic pilot controlled brake to prevent an unintentional rotation.

3-Axes-Manipulators:
The KINSHOFER 3-axes-manipulator features maximum manoeuverability of your attachments at the loader crane‘s tip – and provides flexibility of the loader crane‘s use in any arc position.

The maneuverability is provided by three hydraulic functions: gripping, rotating and tilting (3rd hydraulic cycle needed). The precise positioning is granted by a self-locking worm drive. 

The lower quick coupler is included and provides a fast exchange of attachments.